Sunday, July 31, 2011

Spiders, Sewer, and Storms

Lori and I had planned to go down to the boat on Saturday morning, but ended up going down Friday night, getting there around 10:00pm. Upon opening the boat up the smell of sewer filled the air. Dave had told me that there had been some back up in to the bowel of the toilet when he was there up Wednesday. Being that it was night, I worked some on it but mainly opened windows and got the fans going. Lori and I shut ourselves up in the forward cabin with the fresh air blowing in and spent the night on the new cushions Dave finished. In the morning I tried to see what was going on and why it would back up. I found that the bilge was full, the pump was not working, and it also smelled like sewer. After some testing I found out that the pump had failed. I got a new one at the harbor store and installed it. Later in the day I talked to the harbor owner and he said that a bad Joker Valve was the problem.  He thought it was caused be using the wrong antifreeze when the boat had been winterized before Dave got the boat. Dave is getting a new head (toilet). We also pumped out the hold tank that was full. I cleaned out the bilge area with the wet vac, and scrubbed and washed it out, too. We may have had lake water leaking though the head valve, filling the tank, and the bowl over flowing in to the bilge. I spent a few hours cleaning and pumping everything out. I also got the last drain line installed on the lav sink. Now the whole system is working. The main fresh water tank is smelling good, which was another problem caused from the antifreeze. We have run bleach plus a number of full tanks of water though the system at this point now. Hopefully after the new head is in we will be done with the plumbing system.


By this time, it is late Saturday afternoon  so we decided to get out and sail for a bit. We headed up river a few miles to have grilled chicken kabobs on the lake. 

This is the way to grill...



...as you watch this.


As the sun was setting, we looked for a good place to anchor for the night. We found a cove near Old Frontenac, where there were two other sail boats already achored. After two tries to set the anchor, we settled in with enough space between the other boats. I checked the weather once again and it sounded like a storm may pass near us. We got set for the night and just before going to sleep I checked the radar, and yes, the storm was heading our way in the next hour or so. I was awoken by the lighting around 12:30. I went on deck to check that every thing was okay, right when the winds came in, rocking and rolling the boat, with the rain soon after. Much of the lighting was going horizontally across the sky, lighting up the whole lake around us. The wind kept changing and turning, and at some point the distances from the other boats looked as though they were changing, too. I checked the GPS mark I had made on my phone when we set the anchor, and we were well within the area with the amount of anchor we had out. I got dressed with my rain gear so I could stand outside and watch the other boats, as well as our location. I think one of the boats pulled out farther into the lake till the storm passed, but it was hard to tell. The storm passed over us in about 25 minutes, and as the winds slowed, the skies suddenly became completely clear. We watched the storm head off to the the SE, and enjoyed the star-filled sky.




In the morning after coffee and cereal we headed back to the harbor. We did not even try to put up the sail, as it was calm. When i pulled the anchor up I could not get all of the muck off of it until using the water hose at the dock. After docking, Lori packed up our stuff while I cleaned the boat some more. I did a little more work before we headed home, taking apart the counter top area by the ice box. We think it will be the last wood we need to replace.  



Throughout the weekend many spiders were seen on the boat, in the boat, at the dock, in the grill, and most every where, of all sizes and shapes. That is not so much fun.

 Neither Lori nor I got much sleep the past two nights, but it was still a relaxing weekend.

Lori took a photo of flowers growing on a log in the middle of a pond, along side the road near the boat, and said "bloom where you are planted."



Thursday, July 28, 2011

Last Weekend

Last weekend Dave and I took our last class, ASA 104. We drove up Friday afternoon to Washburn, WI, which took a little over 4 hours. We met the instuctor for dinner at a small cafe, then back to the boat to get set up for the weekend and meet the other student. In the morning we had strong winds coming from the North. Lookng at the radar we saw a storm heading our way so we stayed at the dock till it passed over us, and did the classrooom part of the the class. As we looked to head out, the 30 mph winds had the boat tight on the dock. The boat is hard to turn when motoring in the harbor, so we spent some time on how best to get out without hitting the sea wall after pulling out of the dock.

In the end, the instuctor had us with 4 lines (ropes) on the boat as we got ready to back out. One of the lines ran from the front port side of the boat, around the front of the boat to the aft of the boat, and around the dock to the other side, then back to the starting point on the bow of the boat. In other words, there was a bunch of rope that looped from the front of the boat down the length of the boat, and then around the dock. The idea was to use the rope to stop the boat from hitting the sea wall, which was just South of our dock. Dave was at the helm. Because of the wind, the boat was tight on the bumpers on the dock. Backing up and pulling out of the dock was going ok at first. But after we had just cleared the dock, I saw that the long rope had snagged on the dock. Dave had started to move forward at that point, and I was able to get the line off the boat, but that meant we had about 70' of rope that we or another boat could get caught in their prop. Luckily a guy was at the dock and pulled it in.  Now to get out on Lake Superior.

After leaving the shelter of the habor the waves got higher as we headed out to the lake. Becuase of the weather, all of us had harnesses on and were tethered in. As best as we could tell, we had about 8-10 feet waves with some bigger, plus we headed almost straight in to the 30 mph winds. The instuctor wanted all the dock lines removed and stowed. There was one on the very front of the bow. I crawled on my hands and knees to remove it.

The bow was moving up and down about 15' so when the boat was rocking downwards, the deck of the boat was nearly level with the water.  After a number of tries we decided to let it be.  We had pre-reefed (dropped the sail part-way down the mast) the main sail to the 3rd reefing point, but the main line to raise the sail was clipped to one of the side rails. The main boom is high on this boat compared to Dave's, so the top of the sail when all of the way down can't be reached from the deck. The mast does have fold down steps to climb up and connect the line. So up on the steps I went, and lashed myself the the mast. To make the connection I faced the aft on the front side of the mast and reached around. In the somewhat short time up there, the pitching of the boat caused the mast to slam into my chest repeatedly.

Now we are ready to sail. Dave is still at the helm.  The wind pushes us so the wind and the waves are on the starboard side, and even with the wheel hard over, we are not able to turn into the wind. After a little debate between Dave and the instructor on why, we dropped sail and motored the rest of the day. We got to Bayfeild after 5 plus hours going less than 1.5 knots per hour.  (At the same engine speed on Sunday, we were over 6 knots per hour.)  We took turns at the helm, and simply standing behind the wheel and riding the waves was a lot of work.

In Bayfield, I was able to dock the boat just fine. By this time the wind had calmed down some, and the protection of the habor made the docking a lot easier. The original plan was to anchor off one of the islands but the weather forecast kept changing. After a short relax, the instructor started making dinner for the rest of us. I ended up falling asleep sitting at the table and woke with a plate of food sitting in front of me for a little while. All four of us were completely exhausted from the day. Shortly after dinner, most of us curled up and fell asleep. At least one of the lights got left on all night. It was nearly 8:00 a.m. before I got out of bed, and hadn't slept well the three previous nights. So eleven hours of sleep was nice.

Dave and I then headed up to one of the cafes in Bayfield, WI and got a real breakfast and coffee. About 9:30 a.m. all four of us were ready to head out.  The water was nearly like glass with some light winds. We practiced a number of man overboard drills and were able to do some sailing, before heading back towards Washburn. We also did some anchoring with two anchors. After that the wind had died down to nearly nothing. So we motored the rest of the way back.

We pulled up to the gas dock and refueled, and had the waste tank pumped out. After a fair amount of discussion with the other student on how to back off the dock, he did end up clipping the dock with the anchor. He backed the rest of the way out to the lake, where I took over. In order to re-dock the boat, I had to pull in and do a 180-degree turn with the boat. It's pretty tight quarters with this size of boat (35'). I didn't quite listen to the instructor's instructions on how to dock the boat, but was able to pull it in and dock it just fine. I found out later that the other student was in a similar class and both times while docking, hit the dock boxes with the boat.

The instructor asked us whether we wanted to take the test Saturday evening or after we docked on Sunday. Neither Dave nor I were sure what parts of the book we were supposed to study. I had not looked at the book since the 103 class over a month ago, so we opted to take the test on Sunday afternoon with the plan of reading on Saturday night. Dave was able to do a little bit of reading, but I couldn't keep my eyes open. Before starting the test I was completely prepared to fail it, thinking I could re-take the test in a couple of weeks. The class requires a grade of 80% to pass the written test. I ended up getting 80%. Dave fared a little better, but at the end of the day we both passed.

One of the things the instructor pushed regarding the Belize trip was that we have an extra hand for the stretch across the Gulf of Mexico, so Dave ordered an auto-pilot to assist the two of us. Lori and I will be on the boat this coming weekend to do more work and more sailing. Dave will be off racing.

Sunday, July 24, 2011

Long weekend

We both passed the 104 class. Rain, thunder, 30 mile a hour winds to no wind. 8-10 foot seas to glass its been along weekend. Now a 4 hour drive home. More details later.

Saturday, July 23, 2011

Donalee

This is the boat we are on this weekend. Windy this morning. Rain is on the way.

Friday, July 22, 2011

First night on boat

Tonight we started the 104 Class. we are docked in the harbor but in the morning we head out on the big lake. It sounds like we might have some rain at wind.

More later if I have cell service.

Thursday, July 21, 2011

time is going by fast and slow

Dave and I still have lots of stuff to get ready before the trip. We leave in a little over 3 months there  is only 4 weekends from now till the end of Sept. that both of us are open to work on the boat. Plus all of the things other than the boat we both have to do, and not sure how all of it is going to get done. On top of that there are days I would love to just leave now and can hardly wait to get going. It looks like there will be some work days without the other person. I think Dave is going down to the boat midweek next week, and I am planning to go with Lori the following weekend. I know when we set sail we will we be as ready as we can.

Wednesday, July 20, 2011

fear about sailing??????

I was looking around the net tonight and came across a sailing forum. It talks about the USCG statistics for boating in 2008.

http://www.sailnet.com/forums/general-discussion-sailing-related/61716-how-afraid-should-we-sailing.html

http://www.uscgboating.org/assets/1/Publications/Boating_Statistics_2008.pdf

It is really strange how statistics can make thing look. Below is a quote:

"So, taking these statistics into account, am I correct in surmising that,

[IRONY ALERT] statistically speaking, any sailor's best chance at survival is to get 10 or so hours of some informal training on how to sail, take a 40' vessel into the open ocean in rough to very rough conditions, wear a pfd, don't drink, stay on the boat (regardless of make or year), sail REALLY fast, and, in all probability, you'll be just fine?


It seems the most dangerous sailing out there is sailing a small boat on a sheltered body of water in calm conditions. Could that be right?
Surely that's not it.
[IRONY ALERT]"

Monday, July 18, 2011

Big weekend coming up

This weekend Dave and I taking our last Sailing class. We will be sailing out of Washburn WI near the Apostle Islands and Madeline Island.  We are taking the 104 class Bareboat Chartering Standard. We board the boat Friday night and stay until late afternoon on Sunday. One of the nights will be spent out on lake Superior. This will be the closest thing to open water we can get before hitting the Gulf of Mexico in the Fall. I believe it is Dave and I plus one other student and the instuctor that will be on the boat. The boat is 35' so just a little bigger than Dave's. It is called the "Donalee."

Monday, July 11, 2011

Bikes, trains, automobiles, and the boat

This last weekend was full of boating, camping, biking, and the beach. On Friday Dave, Noelle, my Mom, Scott, Jane, Lori, and myself met early in the morning at the boat. We took it down the lake 10 miles to Pepin, WI, and docked at the Marina, where we had lunch at the Habor Veiw Cafe. The food was outstanding. We did try and sail some on the way back, but with no wind that is hard to do. Dave let Scott be the helmsman, and no one died. After returning back to our marina, my mom and Scott took off to meet some friends of their's, and we headed off for the campsite to meet up with Ed and Beck. Dave, Ed, and myself all had our motorcycles so we could do some riding. Ed was our cook for the weekend, and, as always, did a fabulous job of planning and preparing our meals.

After dinner and the day on the boat all of us were really tired. None of us got much sleep at the campsite. We were supposed to camp at the state park, but currently our state government can't get their stuff together, so the park was closed. We found another campground in Lake City. It was in a nice grassy area with some big shade trees, which were very much appreciated this weekend. One of the things about being located in a river valley is many times there are trains on either side of Lake Pepin. There are two main lines that the trains run on about every ten minutes. Being that we were in Lake City, and there was five rail road crossings in the city, the train laid on its horn for a couple of minutes about every ten minutes. That, combined with the hot temperatures, made for less than desirable sleeping conditions.

After Ed got breakfast made for all of us on Saturday, we made our way down to the boat because there was wind projected for the day. And did we have wind. We ended up with some gusts over 20 miles per hour. At times, the boat was traveling almost 8.5 miles an hour. While that may not sound fast, it's basically as fast as a sail boat will travel. I think both Dave and I enjoyed the wind and maneuvering the boat. Our passengers may not have all shared in our enjoyment, as things slid from one side of the boat to the other. I made the mistake of putting our sandwiches into the cooler that had lots of melted ice in it. So after sliding around for a while, we ended up with soggy sandwiches for lunch.

After we finished up our lunch, we started to head back to the marina and we tried to sail wing and wing, where the sails are on opposite sides of the boat. It is somewhat of a dangerous maneuver because if you have shifting winds (and we did) the boat can accidentally jibe. The boom was almost fully extended on the port side, a little shift in the wind, and swung hard over to starboard. Dave was trying to pull the main sheet in to slow it down a little bit, but luckily ducked and the boom missed his head. We found out later that one of the shackles got bent from this maneuver. With still heavy winds, we got back to the marina, which is normally completely still because of the burms around it. This time I'm at the helm, I tried to come in very slow, and about half way in to the slip, the wind started pushing me towards another boat. So I ended up reversing out, backing up-wind, and then coming back into the slip. I came in a lot better, but a touch too fast, and ended up kissing the dock with the bow of the boat.

We headed back to the campground where Dave, Ed, and I took off South on motorcycles around the lake through Wabasha into Wisconsin North up into Red Wing and back to the camp. Beck stayed at the campsite to hold down the fort, while Lori and Jane went to a movie in an air conditioned theater. Later in the evening Ed cooked up another meal for us, and had a fire and some popcorn and roasted marshmellows and everyone was off to bed, but not necessarily sleeping. It was still, humid, and in the 80s at 10:00 pm. So Jane, Lori, and myself had a hard time getting to sleep.

Despite the trains, we did get more sleep, until the rain came at around 6 a.m.  It started out pretty light, and then got heavier and lasted over a couple of hours. So breakfast was served in our pop-up camper that we pull behind the motorcycle--5 adults and one child. The rain cleared off. Dave headed back to the boat to get some work done. Lori, Jane, and Beck headed to the beach for a quick swim. Ed and myself held down the chairs in the campsite, until the girls returned. Mid-day we packed up and headed home. It was another long tiring weekend, but had a great time.

Sunday, July 3, 2011

Great weekend on the boat

Lori and I spent the last two days on the boat . The temps were in the upper 80's both days. Saturday night we anchored on the lake. We had some light winds on Saturday we sailed down to Pepin got some ice there. It is about 10 miles down river on the lake. then we motored back up about 1/2 Way where we spent the night. At 4:30 am the anchor drag alarm started going off. After checking everything out we were fine. I needed to change the settings some. The lake was nearly like a sheet of glass. The wind changed overnight from north to south, and it looked like we were floating down river, but with that very slight south breeze, it only made it look like it.  In the morning the wind was nearly zero so we ended up motoring back to the harbor and picked up Lori's brother Brian. We did try to do come sailing but still no wind. So we cooked some food on the bbq grill and relaxed  before bring Brian back. Then off to DQ for quick treat then back the boat for more relaxing and naps. Tonight we plan to watch another movie before retiring for the night. In the morning we head home. But we will be back on Friday again.




Friday, July 1, 2011

Many days of work now time to enjoy the boat

Dave and I worked yet another day on the boat on Wednesday. We wrapped  up some of the work but looks like we are getting close with the main part of the rebuild. Dave finished up the main part of the bimini. So I will test fit it in the morning.

This weekend Lori and I get a long weekend on the the boat with just the two of us, plus maybe her brother for a while on Sunday. I do have a few small things to work on like installing the new TV/DVD player and some cleaning. We are both really looking forward to the weekend, with some sailing and lots of relaxing.  

Sunday, June 26, 2011

Rebuild nearly done

Dave and I spent another day working on the boat. Dave worked on the motor all day. We had a hard vibration at the engine speed we will be using going down river. He found it was out of alignment and when he started to line it up he found some of the bolts for the motor mount stripped out. He was able to reset everything so it is a lot tighter and straighter. We did take it out and ran it for about an hour.  It is a lot better, but still has a little vibration and should be just fine. Dave did find some more wood that we need to replace from around the motor near the galley. We brought it back to cut out a new piece.
I worked on the 12 volt electrical stystem most of the day till I ran out of parts and wire. I finished reinstalling the navagation station and mounted the GPS. Now we can use it both above and below deck. I started to get more cleaning done inside the boat. After all the work gets done, everything needs to be cleaned top to bottom.

In the next few weeks we should be able to wrap up most of the boat rebuild, we hope. Dave still has lots of work in order to make all new covers for all of the cushions and replace and add on to the biminey (cover over the cockpit area)

This coming weekend Lori and I plan to spend the weekend on the boat. The following weekend my mom and Scott will be driving through and we are planning a day on the boat with them, Dave and Noelle, Jane and Lori, and myself.  It will be a full boat, but should be fun. Later in the weekend we have another set of friends coming down to camp with us and do some motorcycle riding, and boating.




Posted by Picasa

Sunday, June 19, 2011

another day of work on the boat

Dave and I spent another day on the boat today, but no sailing. Dave spent all day working on leaks from the rain. We found two more problem areas so he took both of them apart and resealed them. I worked on electrical all day. The stereo is in now and I finished all but the last 110 outlet. Next time I should be able to wrap up most of the electrical  work.

I am starting to look at what time we have left before we head South. The summer is flying by already. So right now we are just over 4 months from when we plan to sail. It is going to be very busy the next 6 months. Part of me is looking forward to the 2 weeks after we get to Belize when I will have NOTHING TO DO. It has been over 40 years since I have had more than a few days off in a row with no schedule. I will be able to just relax and do nothing if I want to.

Friday, June 17, 2011

don't fall asleep with blog open

I slept  about 10 hours last night, normally only 6-7 hours. Part of what i did not finish last night was that both Dave and myself successfully did man over board drills single handedly, so on the trip if one of us happens to fall off, the other person has a chance to be able to get the other one out of the water. So hopefully Noelle and Lori can rest a little better that we might be able to rescue the other person.

Thursday, June 16, 2011

Passed the ASA 103 class today

Dave an I both passed the 103 class. Now we only have the 104 class that will be on Lake Superior on the great lakes 2 days and 2 nights on the boat in mid July. The 103 class hands-on part the we did today is about handling the boat docking, anchoring and more sailing. I am sure the Marina was thinking what are those two doing now coming in the the harbor backwards a few times, in and out docking for a few minutes then back out on the lake, turning the boat in circles in front of the fuel dock for most of the day. One of the marina owners asked me if I was that scared of the water because we had to wear some type of personal flotation device: Dave and the instructor wore ones that looked like fanny packs, which left me with the big orange life jacket. They are hard to work on the boat and are hot to wear.  Dave  is going to order inflatable / safety harness for the trip. They will be a lot easier to wear while running the boat than wearing the big orange one.

Lori says: Donavan fell asleep in bed writing this blog, so I took the liberty of cleaning up the writing a bit and making the decision to post this as is. He didn't sleep much last night, and has been ridiculously busy over the past 2-3 months, so I think both the sailor boy and blog should be done for the night.

Sunday, June 12, 2011

First Sailing Weekend


Posted by Picasa
Lori, Jane, and myself camped Friday through Sunday a couple of miles from the boat, at Frontenac State Park. Dave went to the boat on Thursday and finished up the riggings. We found that there were some parts missing for the front sail (the roller furling) and part of it was broken. So before we leave for Belize a new roller furling will have to be installed. We thought the marina was going to adjust all of the riggings for us, and after finding out that the cost of the bottom paint was more than twice what the estimate was, Dave and I opted to finish up the work ourselves. He has a tensioning guage coming next week, so we can correctly tension all of the cables. We got both of the sails put on and they are in really good shape. The main sail has two reefing points like we were hoping it did.

After spending the better part of the afternoon on Friday we fired up the boat and took it out on the lake for a little ways to see how the prop and boat ran. The engine speed that the manufacturer recommends is about 2900 rpms. At that speed we have a little bit of a vibration going on because of the way the shaft and the engine are set up. Through the weekend the engine started to run a little bit smoother, and were able to run it a couple of hours. Docking Dave's boat in this particular marina is really easy. The marina is set down inside of burms so we have no wind and no currents to deal with, unlike the docking that we did for the sailing class on Lake Minnetonka. None of the four times we docked the boat, did Dave and I consider them successful.

After a really long night on yet another leaky air mattress (this must be at least the 8th one in a few years) we opted for breakfast at the Whitle Stop Cafe in Frontenac Station, and then left for the boat. We headed up river to near Maiden Rock before returning back to the marina. It's going to be doable to sail with just the two of us and maneuver the boat as needed.  As soon as we docked, Jane, Lori's 7-year-old daughter, announced "Well, nobody fell off the boat today!"

On Sunday after pancakes at the campsite, we packed up everything and Jane and Lori went for a hike and came across a caterpillar. Now Jane has a pet caterpillar in her room. Her "pet" snail Gary didn't fare too well on Friday, and there was a funeral at the campsite on Saturday afternoon. Sunday we decided to head down to the river, and I ended up being at the helm most of the day. After a few miscalculations, I brought us safely back to the dock.

All in all, it was a great weekend to be on the boat. Little rain, light winds, clouds and a sunburn here and there. We all enjoyed the weekend. Jane is ready to get back on the boat right away.

On Wednesday night, Dave and I will do the second half of the classroom part of the 103 class, and then Thursday we'll be on the boat to finish up the 103 class.

Tuesday, June 7, 2011

The boat is in the water

I talked to Dave tonight the boat is in the water. The mast is not up yet but will be by Friday when we get back to the boat.  We start the 103 class tomorrow then Fri- Sunday camping  about a mile from the boat.

Thursday, June 2, 2011

Passed the 101 class

Both dave and I passed the ASA 101 class tonight. We start the 103 next week.

boat we took 101 class on

Monday, May 30, 2011

Bettie's ready to get wet


She is renamed

We are as ready as we are going to be. On our next trip down, Bettie P should be in the water. The past few weeks have been very busy so I haven't had as much time as I would like to post on this blog. I have been busy with work. This last week we started the 101 sailing classes, which will be done this week, and start the 103 classes next week. Dave raced his Cobra last weekend. We have been busy with the boat too.

In the last few weeks we installed the new larger fuel tank now with a fuel gauge. We installed a 2000 watt power inverter/charger, because having coffee fast in the morning is very important. We did a bunch of rewiring of the boat but have some to go yet. We are adding both 110 and 12 volt outlets throughout the boat. We started to set up the 2 GPS locations on the boat. Most of the wood work is done. We filled and tested the water system. We have sealed most of the leaks we know about on the upper deck, and have one or two more to fix. The motor was started and ran for 10 to 15 minutes. We tested some of the electrical systems and found some stuff we want to change over the summer. Dave removed all the old graphics and installed all the new ones. Yesterday the marina lifted the mast up on top of the boat, so today I removed all of the packing materials and pre-rigged the mast with some of the instrumentation, and as much of the standing rigging as I could.

The marina has one last coat of paint to apply before putting her in the water and set the mast for us, which will happen within the next week or so.

Because of classes and other things going on, neither Dave nor I will make it back to the boat until a week from Friday. That weekend Lori, her daughter Jane, and I will be camping about a mile from the boat so we're hoping to spend some sailing time over the 3-day weekend. The week after that we will be finishing up the 103 class on Dave's boat.

The 101 class was interesting, we had about a minute and a half of instruction before boarding the boat and setting the sails. The boat that we used at the class was much smaller than Dave's, but the fundamentals are still the same. After a few hours out on the water I am more excited than ever to get out on the water and sail Dave's boat and prepare for the long trip this Fall.





we moved the mast on top of the boat and pre-rigged it so they can set it when it goes in the water 



Saturday, May 28, 2011

Fwd: Check-in/OK message from Bettie P SPOT Messenger

---------- Forwarded message ----------
From: <noreply@findmespot.com>
Date: Thu, May 26, 2011 at 5:47 PM
Subject: Check-in/OK message from Bettie P SPOT Messenger
To: donavanshomes@gmail.com


 Bettie P
 Latitude:44.90779
 Longitude:-93.64084
 GPS location Date/Time:05/26/2011 17:48:04 CDT

 Message:Were in the world is Bettie P.

 Click the link below to see where I am located.
http://fms.ws/4ubxa/44.90779/\-93.64084

 If the above link does not work, try this link:
 http://maps.google.com/maps?f=q&hl=en&geocode=&q=44.90779,-93.64084&ll=44.90779,-93.64084&ie=UTF8&z=12&om=1

Bettie P

 You have received this message because Bettie P has added you to their SPOT contact list.

 Every day is an Adventure. Share Yours.
 http://www.findmespot.com

Tuesday, May 17, 2011

5/11/2011

We made good progress today despite on and off rain. We got a couple of the stanchions reinstalled and sealed. I was able to finish all of the plumbing for the holding tank for the toilet and all the valves, and reinstall the seating over top of it. I also started reinstalling the nav station and it is all in place other than the top cover. We did rubber coatings on the forward cabin and the area behind the galley, so other than touch up, all we have left is the aft cabin. We're still having a small problem with seapage in an area near the bilge. We drilled a hole today and drained that area. The whole bottom is black slimy goo that we need to wash out before we can put the sealer in. The marina was able to put on another coat of bottom paint. They still have four more coats before it's finished. The boat should be ready to go in the water in about a week and a half to two weeks, as long as everything goes well.


melted light from Sunday

2nd view of light

forward cabin before final coat of rubber

nav station, almost done with finished walls

galley before final coat of rubber

starboard wall nearly done

port wall waiting for upper cabinets
Posted by Picasa

5/15/2011 photo update






Posted by Picasa

Sunday, May 8, 2011

5/8/11

Driving home now. We got all of the 2nd coat of the rubber coating on today before the rain came in. The rubber coating is strange stuff to work with. While trying to heat up the forward cabin, I melted the light off the ceiling, oops. Wednesday we should wrap up the rubber and start putting everything back together.

Saturday, May 7, 2011

5/4/2011

Today Dave and I started coating the interior with the rubber coating, it is a little harder to get smooth than we thought, but it's looking good. We will try to finish it on Sunday or next Wednesday. Dave installed the new prop. We also slid the new fuel tank into place. It's a very tight fit but it goes in. We may need to move the exhaust pipe from the diesel motor to fit the tank. We reinstalled 3 winches that Dave had repacked with grease.

We are finlly getting warmer weather. The water at the dock has dropped 4 or 5 feet so far, but has a ways to go before it gets to the normal level. The marina is putting boats in the water every day now. There are  more and more people working on boats around us. We are looking forward to getting the boat in the water in the next few weeks.

Sunday, May 1, 2011

More photos #2

more cabinets installed

The Spot

old brass prop and new composite prop

4/30-5/1/2011

Work is progressing well. On Saturday Dave and I rebuilt and sealed all of the cabinets except the top of the navigation station. Dave laminated two sheets of plywood to make the top of the nav station, which took most of the day on Saturday. On Sunday, Dave needed to work on the race car to get it ready for a race in a few weeks. I went down to the boat and finished up the sanding, and everything is ready to start for the rubber coating on Wednesday. I also installed all of the woodwork I could before the coating goes on. I layed out how the new plumbing  is going to run from the toilets holding tank, Y valve, macerator pump and discharge valve. The way it was before it would not pass Coastguard inspection. You cannot discharge the holding tank into the water unless you are more the 3 miles offshore, and, it must be locked with the lock disabled anytime not offshore.

 New Y valve & Macerator pump

new top for seating area


Cabinet  rebuilding in shop with  Dave's race car

Part of the Nav station before build



rust stains are where the boat was leaking, fixed now


Thursday, April 28, 2011

4/27/2011

Another cold wet day working on the boat.  Today Dave sealed the leak in the keel with a resin and a vacuum pump, and torqued the bolts on the keel, we will see next time if it worked. We are fairly sure it will.  I burned off the left over fibers on the inside of the hull from the liner and final sanded about 3/4s of the boat. So all I have left is the aft cabin. When we get some warmer weather we can install the rubber coating. We can start cleaning and putting stuff back together after that. We took off a couple of the stanchions on the boat.  One of them is bent and all of them leak and will need to be removed and resealed. The new rudder came in and we brought it down so the marina can paint and install it. The boat needs to be lifted to install in. Dave ordered a bunch of the stuff we need to start putting the boat back together.

This weekend we will be working on rebuilding the cabinets and sealing them.

Planning the first leg of the trip, Pepin to Mobile

The whole trip is 2,500 miles, with 1,500 miles from Lake Pepin, Minnesota, to Mobile, Alabama and includes 35 locks. Then there is 1,000 miles of open ocean from Mobile to Dave's dock in Belize. We will leave some time between mid Oct (of this year, 2011) and the 1st of Nov. We are trying to leave and not be on the Gulf of Mexico until after Hurricane season ends on Nov 15, as boats and hurricanes don't mix well. Mid to late Oct in Minnesota can be very nice and beautiful, or cold and wet. Many of the  marinas on the upper Mississippi start closing after Labor day weekend.  We hope to travel about 70 miles a day on the river, which equates to about 10 plus hours a day for 3 weeks, going down river. That late in the year there is only about 9 hours of daylight and losing some each day we are on the boat.  We will be using the diesel motor to get down the river, because a 53' tall mast won't clear a number of bridges along the way. When we get to Mobile we will have the mast re-stepped with a crane. Dave is looking in to having the mast trucked down and we would meet it down there. If not, we would build a cradle on the boat to carry it.  A 34' boat and 53' mast it would stick out about 10 feet on each end, making docking and the locks more of a challenge. The first week will have a number of challenges. It is about 390 miles to the first marina that will be open where we can get fuel, plus the weather could be cold with temps possibly near freezing at night. After that we will be far enough south that the marinas are open year round, and the weather will be warmer. We are looking to make stops along the way to relax, get supplies, do laundry, and get some real meals, as neither Dave nor myself are gourmet chefs.

Tuesday, April 26, 2011

Added a mapped photo album to side bar

I added a photo album to the blog today on the side bar. You will be able to see all of the blog photos with a map of where they were taken.  I have the cell phone set to include GPS location when I take photos, but will have to add location manually with my good camera.

Here is the direct link:
https://picasaweb.google.com/lh/albumMap?uname=donavanshomes&aid=5593753653520297409#map

I also added a follow by Email link so you could follow blog by email. Just add your email to the box and click the submit button.

Monday, April 25, 2011

Test post for photo location

Testing to see if GPS location shows up on blog

The Spot, or, Where the heck are they???

The spot satellite GPS messenger is one of the ways we can let people know during our trip that we are not at the bottom of the ocean. It lets us send a message that we are fine as well as a GPS location with a map link. It also has a SOS button so if we did get in trouble it would send out the location we are at and help would be sent to us. When we are in the gulf this is the one of two ways we can reach the rest of the world. The other is by UHF radio but it has limitations of around 12 to 20 miles, depending on many factors.

 
We plan to send out a daily "we are OK " message each day we are on the trip to let everyone know we are OK and let people know where we are.


Here is a link to the spot website http://www.findmespot.com/en/index.php?cid=102


Below is a test message email that we sent from the boat the other day. It is very accurate to the location Dave sent it from. I am hoping to find a way so it will post to the blog automatically when we send the "OK" message during the trip, and would let people that want to follow us as we travel.


Subject: Check-in/OK message from Bettie P SPOT Messenger
X-SPOT-Latitude: 44.50151
X-SPOT-Longitude: -92.31683
X-SPOT-Messenger: Bettie P
X-SPOT-Time: 1302366369
X-SPOT-Type: Check-in/OK
X-ELNK-Received-Info: spv=0;
X-ELNK-AV: 0
X-ELNK-Info: sbv=0; sbrc=.0; sbf=0b; sbw=000;
 Bettie P
 Latitude:44.50151
 Longitude:-92.31683
 GPS location Date/Time:04/09/2011 11:26:09 CDT
 Message:This is the default SPOT Check-in/OK message. Please update.
 Click the link below to see where I am located.
http://fms.ws/4ZMQ3/44.50151/\-92.31683
 If the above link does not work, try this link:
http://maps.google.com/maps?f=q&hl=en&geocode=&q=44.50151,-92.31683&ll=44.50151,-92.31683&ie=UTF8&z=12&om=1
Bettie P

Saturday, April 23, 2011

4/23/2011

Today we made some progress. We pumped out the old fuel tank and removed it. Installed the new ports, one drain, and one water intake so we should be able to not sink in the boat now.

 I cleaned the bilge out, which is the lowest part of the boat inside and has a pump that will pump any water up and out of the boat. It is sludgy slimey and stinks. It is now cleaner and dry. Last time we were at the boat Dave saw water seeping out on the keel. After talking to the guy at the marina he told us we need to tighten the bolts holding the keel to the hull. The bolts come up through the bottom of the boat and are located in the bilge. After we dried out the bilge the seepage nearly stopped. We also found two of the bolts near the leak that were not tight. On Wednesday Dave is going to bring his vacuum pump, which we will put over the areas of the seepage in order to draw the resin into the area and seal it up, then we will retorque all of the keel bolts.  

Dave tested the rubberized coating by applying it to a small area. This will replace the carpet liner that we tore out the other day.  It still needs the top coat but it's looking like it will work well.


Bilge area with floor open you can see the top of the bolts sticking out of the water


one of the ports we changed

old fuel tank as we pumped it out

test area with sealer

fill coat still need top coat of sealer

53' mast for the boat sitting on blue barrels

bottom hull with 2nd coat of paint